Chemicals for water treatment: Currently, about 75% of surface water sources and 30% of underground water sources in many countries of the world, including our country, are not suitable for drinking. Despite all the efforts of public central water supply companies in cities and rural areas, drinking water from taps in our apartments and houses rarely meets modern standards that determine its proper quality. The same applies to primary natural resources used to organize private water supply systems.
Water purification chemicals Desalination equipment Atiaco

Classification of suitable chemicals for water purification: the first rule of dealing with pollution problems, proper selection of filter units,

Their technical, physical and operational characteristics. To understand which impurities and compounds should be removed,

Accurate laboratory analysis of water is required. Based on the obtained results, the experts make a decision

How many and which stages of purification are there in a particular case.

Atiaco Co

One of the most effective ways to improve the quality of source fluid is chemical water treatment.

The methods in this section are actively used by experts to neutralize mineral impurities in the composition.

Decolorization and disinfection of the environment are used.

Water purification chemicals Desalination equipment Atiaco
The three common categories of chemicals used as active neutralizers are:

oxidizing agents (ozone, chlorine, manganese);
alkaline substances (lime, soda, sodium hydroxide);
Acids (hydrochloric and sulfuric).

The allowed concentration of suspensions in the primary environment can vary from 1 mg/liter to 30 grams/liter.

Note that chemical water purification methods must be implemented under the strict supervision of water purification experts.

They are mainly used in industrial plants. Working with reagents at home without proper knowledge, experience and equipment is very dangerous.

Atiaco Co
Chemical methods of water purification

We got acquainted with water purification chemicals above, let’s go to the working methods of water purification and their features.

Neutralization: the complete destruction of pathogenic microflora and other components along the way, this includes bringing the pH level of the water prepared

to standard values in the range of 6.5-8.5. The essence of the method lies in the beneficial interaction of acids and alkalis with the subsequent formation of the corresponding salts and water.

Oxidation: It is suitable to use the method in situations where the use of pre-filters does not bring visible results.

Removal of persistent impurities is done using ozone, chlorine, pyrolusite or potassium bichromate.

Suitable for neutralizing various toxic substances as well as other components of the main composition of water that are difficult to extract in other ways.

Recovery: This method involves starting processes to restore all components in the environment to their original physical state.

Its main purpose is to remove formations formed using one of the physical and chemical methods of sedimentation, fluorination or filtration.

Effectively combats arsenic, mercury, chromium and other life-threatening particles. iron sulfate, sulfur dioxide,

Activated charcoal, hydrogen, and similar analogues with their chemical properties are used as reagents.

Among the effective methods of water purification, the method of extracting pollutants can also be mentioned. Use it in cases where impurities

It is suitable if the solution in water has technical or chemical value. The extractant introduced into the primary liquid is responsible for the total concentration of foreign components.

After the completion of the chemical reaction, the resulting neoplasms are easily separated from the water. In the future, the extractor can be reused.
Benefits of chemical water treatment

Based on the use of different reagents, modern chemical water purification methods are considered to be the most efficient and fastest methods.

The active substances responsible for obtaining the corresponding reaction convert the dissolved impurities into a solid insoluble state.

In the future, such materials are much easier to remove than smaller particles and suspensions.

Note: These methods and chemicals are performed in special cases by experts and are similar to other water purification methods such as distillation.

And the evaporation of these methods, despite its advantages, is not recommended at home. This article is for you to familiarize yourself with chemicals

For water purification and to complete information, we have published water purification experts.